PSS9s Installed

PSS9s Installed- February 2006

Notes:

TMS Product Page
In addition to the PSS9s from TMS, we also sourced their Camber Plates. They are spec'd only for the E36, and TMS actually told us they wouldn't work due to 'stack height', but, they in fact do work.
I needed 5mm spacers up front & replaced the 15mm RE spacers in the rear with 10mm TMS spacers
we rolled the rear fenders to keep the 285s & 10mm spacers
front is ~ -3.5* camber via digital gauge
Parts List:

Quantity	P/N	Name	List
2	3135-1091-764	support	$41.50
2	3135-1127-263	bracket	$2.00
2	0711-9912-506	Hex Screw	$0.22
2	0712-9964-672	Nut	$0.25
2	3111-1114-348	Washer	$0.41
2	0712-9922-716	Brass Nut	$0.25

Before

During

The rear height adjustment, was of course, the challenge. I don't know what it is with this 318 kit, but with the just a few threads left on the height adjusters, it was still seriously jacked up.

Rounds 1: We removed the height adjusters altogether [~15mm worth], and just used some E30 5mm spring pads. This got me back to where I was basically with the H&R Bilstein setup.