08.25.10 SmartyCam
Prep
Install
Hanging over the rollbar,
in the dark, trying to count pin locations, is the suck. At least for me; I
don't do electrical very well.
Anyway, sliding the group out of the connector made counting much easier.
The colors of wires 36 & 37 were not what was described in my manual, so I had
to place call to Tech Support to verify if I should be looking for colors, or is
I should be looking for position. T/S told me position, and moreover, the CAN
lines are a twisted pair, and at that point I knew I had the correct
wires identified.
.jpg)
