04.18.09 'Factory' GDO

This write up has been done many times before.

Here are my reference articles:

• http://gallery.rennlist.com/gallery/albur29

• http://forums.rennlist.com/rennforums/996-forum/403030-garage-door-opener-into-a-996-a.html

• http://forums.rennlist.com/rennforums/996-forum/205903-itzkirbs-garage-door-opener-mod.html

• Ordered the switch [99661311910A05 ] from JPLV

• from my local Ace Hardware

  •     various spade male and female connectors

  •     1" shrink wrap

  •     4' of 16ga wire

Genie GDO Disassembly; the board just pops right out after holding back a small plastic retention tab; really just like the factory key remote board.

The blue markings are from a Sharpie; these trigger the door to open

Supplies/Materials

Mocked Up Connections with the old GDO case as a stand in for the OEM switch.  I have to see it to keep it straight.